ABB SCU200 Скачать руководство пользователя страница 37

Страница: 37 / 88

SCU200

INSITE ENERGY MANAGEMENT SYSTEM

For output channels external power supply with overcurrent protection (by fuse or internal functionality)

is required.

- 24VDC is maximum value of DC, can also be lower.

- 230VAC is maximum value of AC, can also be lower.

Do not connect AC to DC to the input terminal: no external supply of input is allowed, it will permanently

damage the device.

4.4.3.Final connection

Finally, connect the current sensors and the I/O modules to the control unit.

Plug in the cable, check the correct connection direction. (Picture to the right)

Attention: When plugging in the InSite flat cable on the sensors and I/O modules, check the correct
connection direction.

4.5.Meters connection

Connect up to 32 energy and/or power meters (Up to 16 Modbus RTU and 16 Modbus TCP). Meters shall

be connected in daisy chain configuration.

Содержание SCU200

























































































Результаты поиска

Содержание SCU200

Отзывы:

Бренды по названию

Популярные бренды

ABB SCU200, Руководство пользователя

Результаты поиска

Содержание SCU200

Отзывы:

Бренды по названию

Популярные бренды