manualshive.com logo in svg

ABB RBIP-01, Руководство пользователя

Поделиться
Скачать
ABB RBIP-01 Скачать руководство пользователя страница 9

Introduction to this manual

9

Introduction to this manual

What this chapter contains

This chapter describes 

RBIP-01 BACnet/IP Router Module User’s Manual

.

Intended audience

The manual is intended for the people who are responsible for commissioning and 
using an RBIP-01 BACnet/IP Router Module. The reader is expected to have basic 
knowledge of electrical fundamentals, Building Automation and Control networks 
(BACnet), electrical wiring practices and operating the drive.

Before you start

It is assumed that the drive is installed and ready to operate before starting the 
installation of the module. Detailed installation instructions of the module are given in 

RBIP-01 BACnet/IP Router Module Installation Manual

 (3AUA0000040168 Rev A 

[English]).

In addition to conventional installation tools, have the drive manuals available during 
the installation and commissioning as they contain important information not 
included in this manual. The drive manuals are referred to at various points of this 
document.

What this manual contains

This manual contains information on the configuration and use of the RBIP-01 
BACnet/IP Router Module. 

Safety instructions

 are featured in the first few pages of this manual. 

Introduction to this manual

 contains a short description of the manual.

Overview

 

gives basic information on BACnet routing and contains a short 

description of the RBIP-01 BACnet/IP Router Module.

Quick start-up guide

 gives short instructions on configuring the RBIP-01 BACnet/IP 

Router Module settings.

Working with the web server

 describes how to connect to the router module’s web 

server and how to login and logout, gives general setting instructions and lists the 
user right levels. 

User interface

 describes the user interface menus of the router module and their 

use.

Fault tracing

 lists the LED indications and their meaning.

BACnet Protocol Implementation Conformance Statement (PICS)

 is attached to 

the end of the document.

Содержание RBIP-01



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды