manualshive.com logo in svg

ABB RBIP-01, Руководство пользователя

Поделиться
Скачать
ABB RBIP-01 Скачать руководство пользователя страница 11

Introduction to this manual

11

DCC/RD

Device Communication Control/Reinitialize Device

DHCP

Dynamic Host Configuration Protocol

Directed broadcast

See the one-hop forwarding description in this table.

Distribution mask

A distribution mask or broadcast distribution mask indicates how 
broadcast messages are to be distributed on the IP subnetwork 
served by the BBMD.

FD

A Foreign Device is a BACnet device that has an IP subnetwork 
address different from those comprising the BACnet/IP network 
that the device seeks to join. For more information, see section 

Foreign Devices

 in chapter 

Overview

.

FW_Revision

Firmware_Revision is a property assigned by the vendor to 
represent the level of firmware installed in the BACnet device.

MAC address

The MAC address of the router module in the MS/TP network

MAX Info Frames

In MS/TP, the Max_Info_Frames property specifies the maximum 
number of information frames the node may send before it must 
pass the token to the next node. 

MS/TP Master-Slave/Token-Passing 

protocol designed specifically for 

building automation and control devices as part of the BACnet 
standard

One-hop forwarding

There are two ways that a BBMD may distribute broadcast 
messages to remote IP subnetworks: One-hop or two-hop 
distribution. 
For two-hop forwarding, see the description in this table.
For more information on one hop forwarding or directed 
broadcast, see section 

Broadcast Distribution Table Entry

 in 

chapter 

User interface

. The one-hop mode requires that the IP 

router serving the destination subnetwork is configured to 
support the passage of directed broadcasts.

Poll For Master frame

In MS/TP, the Poll For Master frame is transmitted by master 
nodes during configuration and periodically during normal 
network operation. It is used to discover the presence of other 
master nodes on the network and to determine a successor node 
in the token ring. 
Both master and slave nodes shall expect to receive the Poll For 
Master frames. The master nodes must respond to Poll For 
Master frames, and the slave nodes must ignore them.

Token 

MS/TP uses a token to control access to a bus network. A 
master node may initiate the transmission of a data frame when 
it holds the token. Both master and slave nodes may transmit 
data frames in response to requests from master nodes. See 
also the description of Max_Info_Frames.

Содержание RBIP-01



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды