manualshive.com logo in svg

ABB RBIP-01, Руководство пользователя

Поделиться
Скачать
ABB RBIP-01 Скачать руководство пользователя страница 36

User interface

36

Ethernet submenu

When you select the 

Ethernet

 submenu, the 

Ethernet Settings

 page opens. It 

provides settings for BACnet/Ethernet (ISO 8802-2 type 1 on ISO 8802-3).

Ethernet Settings page

If your router works as an Ethernet router, fill in the BACnet/Ethernet network 
number:

Save

 button

The 

Save

 button temporarily saves the changes made on this page. 

Note:

 You must save your changes before switching to another configuration page. 

If you switch to another page without saving, the settings remain unchanged.

Note:

 You must activate the configuration before restarting the router module. 

Activating the configuration saves all settings permanently. If you restart the router 
module without activating the configuration, the old configuration remains active and 
the changes are lost.

For activating your settings, see section 

Activate menu

 in chapter 

User interface

.

Ethernet Settings

Description

Network Number

The network number of your local BACnet/Ethernet network. The 
network number must be unique within the entire network. The network 
number is valid in the range from 1 to 65.535.

Содержание RBIP-01



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды