39
FEM610 |
PROCESSMASTER | OI/FEM610-EN REV. A
Once you have logged on to the corresponding access
level, you can edit or reset the password. Reset (status
‘no password defined’) by selecting ‘ ’ as a password.
4
Enter the corresponding password (see page 40).
No password is preset in the factory settings. Users
can switch to the configuration level without
entering a password. The selected access level
remains active for 3 minutes. Within this time
period you can toggle between the process display
and the configuration level without re-entering the
password.
5
Use
to confirm the password.
The LCD display now indicates the first menu item on
the configuration level.
6
Select a menu using
/
.
7
Confirm the selection with
.
7 . . .Operation
. . .Switching to the configuration level
(parameterization)
Enter Password
**********
QRSTUVWXYZ
Next
OK
Numerical entry
When a numerical entry is made, a value is set by entering the
individual decimal positions.
1
Select the parameters you want to set in the menu.
2
Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Entry from table
When an entry is made from a table, a value is selected from a
list of parameter values.
1
Select the parameters you want to set in the menu.
2
Use
to call up the list of available parameter values.
The parameter value that is currently set is highlighted.
3
Select the desired value using
/
.
4
Confirm the selection with
.
This concludes the procedure for selecting a parameter value.
Menu name
Parameter name
12 .3456 [unit]
Next
Edit
Parameter name
Parameter 1
Parameter 2
Parameter 3
Cancel
OK
Menu Name
Parameter name
Currently set value
Next
Edit
Selecting and changing parameters
