manualshive.com logo in svg

ABB IRB 6400R, Руководство пользователя онлайн

Поделиться
Скачать
ABB IRB 6400R Скачать руководство пользователя страница 26

Description

16

Product Specification IRB 6400R M99/BaseWare OS 3.2

Stationary TCP

When the robot is holding a work object and working on a stationary tool, it is possible 
to define a TCP for that tool. When that tool is active, the programmed path and speed 
are related to the work object.

Program execution

The robot can move in any of the following ways:

- Joint motion (all axes move individually and reach 

the programmed position at the same time)

- Linear motion (the TCP moves in a linear path)

- Circle motion (the TCP moves in a circular path)

Soft servo - allowing external forces to cause deviation from programmed position - 
can be used as an alternative to mechanical compliance in grippers, where imperfection 
in processed objects can occur.

If the location of a workpiece varies from time to time, the robot can find its position 
by means of a digital sensor. The robot program can then be modified in order to adjust 
the motion to the location of the part.

Jogging

The robot can be manually operated in any one of the following ways:

- Axis-by-axis, i.e. one axis at a time

- Linearly, i.e. the TCP moves in a linear path (relative to one of the coordinate 

systems mentioned above)

- Reoriented around the TCP

It is possible to select the step size for incremental jogging. Incremental jogging can be 
used to position the robot with high precision, since the robot moves a short distance 
each time the joystick is moved.

During manual operation, the current position of the robot and the external axes can be 
displayed on the teach pendant. 

2.9  External Axes 

The robot can control up to six external axes. These axes are programmed and moved 
using the teach pendant in the same way as the robot’s axes.

The external axes can be grouped into mechanical units to facilitate, for example, 
the handling of robot carriers, workpiece manipulators, etc.

The robot motion can be simultaneously coordinated with for example, a one-axis 
linear robot carrier and a rotational external axis. 

A mechanical unit can be activated or deactivated to make it safe when, for example, 
manually changing a workpiece located on the unit. In order to reduce investment costs, 
any axes that do not have to be active at the same time, can share the same drive unit.

Содержание IRB 6400R


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды