KNX Technical Reference Manual
ABB-i-Bus
®
-KNX Millenium
Operation
KNX Technical Reference Manual | 1473-1-7819
— 19 —
8
Operation
8.1
Overview of control elements
Fig. 9: Control and display elements
Position
Control / display elements
1
Button for selecting the fan speed level
2
Rotary control element
3
Button for adjusting the set value
4
Button for activating the ECO mode (e.g. during your absence)
5
Display
6
Button for activating / deactivating the room temperature controller
Note
•
The basic setting of the display always indicates the set-point temperature or the fan speed
level.
•
Starting from paragraph "General control and display functions" on page 21 the individual
functions and associated control steps are presented.
•
The default setting of the display always indicates either the set-point temperature or the fan
speed level (parameter setting in Power-Tool)! Only the set-point temperature is dealt with in
the following!
•
For the colour of the indications in the display observe paragraph "LED colour concept" on
page 20.
