KNX Technical Reference Manual
ABB-i-Bus
®
-KNX Millenium
Description of applications /
objects
KNX Technical Reference Manual | 1473-1-7819
— 40 —
Note
The following parameters are available only when parameter "Control type cooling" is set on
"FanCoil".
Additional parameters for "Control
function = Cooling"
Settings
Comments
send automatic switch-off
•
deactivated
•
activated
–
Manual operation of fan stage
•
Automatic On / Off
•
Manual On/Off
–
manual switching for frost
•
deactivated
•
activated
–
Number of fan stages
•
3 steps
•
5 steps
–
Evaluation stage status
•
deactivated
•
activated
–
Control value output for fan stage 1 cooling
(0 - 255)
0 … 255
–
Control value output for fan stage 2 cooling
(0 - 255)
0 … 255
–
Control value output for fan stage 3 cooling
(0 - 255)
0 … 255
–
Control value output for fan stage 4 cooling
(0 - 255)
0 … 255
Only available when parameter "Number of
fan stages" is set on "5 steps".
Control value output for fan stage 5 cooling
(0 - 255)
0 … 255
Jump-back active, if fan for cooling off
•
deactivated
•
activated
–
Fan stage limit cooling for ECO mode
•
deactivated
•
activated
–
max. fan stage cooling for ECO mode
0 … 5
Only available when parameter "Fan stage
limit heating for ECO mode" is set on
"activated".
Timeout for fan cooling (min)
1 … 360
–
