ABB ACS880-11, Руководство по оборудованию

Страница: 60 / 232

Requirement for Nominal AC sup-
ply voltage
ABB du/dt and common mode filters, insulated N-end
motor bearings
Motor insulation
system
Pn ≥ 200 kW 100 kW ≤ Pn <
200 kW
Pn < 100 kW
Pn ≥ 268 hp 140 hp ≤ Pn <
268 hp
Pn < 140 hp
+ N + CMF + N - Standard U
n ≤ 500 V
+ d u /d t + N + CMF + d u /d t + N + d u /d t Standard 500 V < U
n ≤ 600
V
or
+ N + CMF + N - Reinforced
+ d u /d t + N + CMF + d u /d t + N + d u /d t Reinforced 600 V < U
n ≤ 690
V
Additional requirements for non-ABB high-output and IP23 motors
The rated output power of high-output motors is higher than what is stated for the
particular frame size in EN 50347 (2001).
If you plan to use a non-ABB high-output motor or an IP23 motor, consider these
additional requirements for protecting the motor insulation and bearings in drive systems:
• If motor power is below 350 kW: Equip the drive and/or motor with the filters and/or
bearings according to the table below.
• If motor power is above 350 kW: Consult the motor manufacturer.
60 Guidelines for planning the electrical installation