ABB ACS880-11, Руководство по оборудованию

Страница: 223 / 232

• Fault detection time: Channels in different states for longer than 200 ms
• Fault reaction time: Fault detection time + 10 ms
• Indication delays:
• STO fault indication (parameter 31.22 ) delay: < 500 ms
• STO warning indication (parameter 31.22 ) delay: < 1000 ms
￭
Terms and abbreviations
Description Reference Term or ab-
breviation
Classification of the safety-related parts of a control system
in respect of their resistance to faults and their subsequent
behavior in the fault condition, and which is achieved by the
structural arrangement of the parts, fault detection and/or by
their reliability. The categories are: B, 1, 2, 3 and 4. EN ISO 13849-1 Cat.
Common cause failure (%) EN ISO 13849-1 CCF
Diagnostic coverage EN ISO 13849-1 DC
Hardware fault tolerance IEC 61508 HFT
Mean time to dangerous failure: (Total number of life units)
/ (Number of dangerous, undetected failures) during a partic-
ular measurement interval under stated conditions EN ISO 13849-1 MTTFD
Average probability of dangerous failure on demand, that is,
mean unavailability of a safety-related system to perform the
specified safety function when a demand occurs IEC 61508 PFDavg
Average frequency of dangerous failures per hour, that is,
average frequency of a dangerous failure of a safety related
system to perform the specified safety function over a given
period of time IEC 61508 PFH
Performance level. Levels a…e correspond to SIL EN ISO 13849-1 PL
Periodic test performed to detect failures in a safety-related
system so that, if necessary, a repair can restore the system
to an "as new" condition or as close as practical to this con-
dition IEC 61508, IEC
62061 Proof test
Systematic capability IEC 61508 SC
Safe failure fraction (%) IEC 61508 SFF
Safety integrity level (1…3) IEC 61508 SIL
Maximum SIL (level 1…3) that can be claimed for a safety
function or subsystem IEC/EN 62061 SILCL
The Safe torque off function 223