![background image](http://html1.mh-extra.com/html/abb/acs355-series/acs355-series_quick-start-up-manual_3322119012.webp)
Drive configuration
Contents of this chapter
This chapter describes how to configure the drive for PROFIBUS DP or PROFINET control based on
ABB specific drives library
ABB_DRIVE_LIB
.
Overview
You can configure the drive for PROFIBUS DP or PROFINET control based on ABB specific drives
library
ABB_DRIVE_LIB.
Set the d
rive parameters from the drive’s control panel or from drive-specific PC tool (DriveWindow Light
for ACS355 and ACS550, DriveStudio for ACS850 and ACSM1, Drive Composer for ACS380, ACS580
and ACS880, and DriveWindow for ACS800).
Note:
All parameter settings are based on drive default settings. If the drive was parametrized previously,
return to default settings before continuing. It can be done by:
ACS355 and ACS550
Change macro (and then change back again) in parameter
99.02.
ACS800
Set parameter
99.03
APPLIC RESTORE
to YES
ACS850 and ACSM1
Set parameter
16.04 Param restore
to Restore defs
ACS380, ACS580 and ACS880
Set parameter
96.06
Parameter restore
to Restore defaults
2
Содержание ACS355 series
Страница 1: ...Quick start up guide ABB Drives function blocks for Siemens PLC s...
Страница 76: ...A new subnet and IP protocol is added Figure 56 IP added...
Страница 84: ...9 Click to download the configuration to PLC Figure 73 Download to device...
Страница 139: ...139 Contact us www abb com drives www abb com drivespartners 3AXD50000037864 Rev B EN 2018 02 07...