ABB ACQ810-04, Руководство по оборудованию, Страница: 125 / 144

Technical data 125
Air temperature -15 to +55 °C
(5 to 131 °F).
No frost
allowed. See section
Derating .
-40 to +70 °C
(-40 to +158 °F) -40 to +70 °C
(-40 to +158 °F)
Relative humidity 5 to 95% Max. 95% Max. 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the
presence of corrosive gases.
Contamination levels
(IEC 60721-3-3, IEC 60721-3-
2, IEC 60721-3-1)
No conductive dust allowed.
Chemical gases:
Class 3C2
Solid particles:
Class 3S2
Chemical gases:
Class 1C2
Solid particles:
Class 1S3 Chemical gases:
Class 2C2
Solid particles:
Class 2S2
Atmospheric pressure 70 to 106 kPa
0.7 to 1.05 atmospheres 70 to 106 kPa
0.7 to 1.05 atmospheres 60 to 106 kPa
0.6 to 1.05 atmospheres
Vibration (IEC 60068-2-6.
Test Fc)
Max. 0.1 mm (0.004 in.)
(10 to 57 Hz),
max. 10 m/s
2
(33 ft/s
2
)
(57 to 150 Hz) sinusoidal
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
max. 15 m/s
2
(49 ft/s
2
)
(9 to 200 Hz) sinusoidal
Shock (IEC 60068-2-27) Not allowed Max. 100 m/s
2
(330 ft./s
2
), 11 ms
Max. 100 m/s
2
(330 ft./s
2
), 11 ms
Free fall Not allowed 100 mm (4 in.) for weight
over 100 kg (220 lb) 100 mm (4 in.) for weight
over 100 kg (220 lb)
Materials
Drive enclosure • PC/ABS 2.5 mm, color NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness of coating
100 micrometers, color NCS 1502-Y
Package Plywood and cardboard, bands PP.
Disposal The drive contains raw materials that should be recycled to preserve energy
and natural resources. The package materials are environmentally
compatible and recyclable. All metal parts can be recycled. The plastic parts
can either be recycled or burned under controlled circumstances, according
to local regulations. Most recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and
printed circuit boards can be landfilled. The DC capacitors (C1-1 to C1-x)
contain electrolyte and the printed circuit boards contain lead, both of which
are classified as hazardous waste within the EU. They must be removed and
handled according to local regulations.
For further information on environmental aspects and more detailed recycling
instructions, please contact your local ABB distributor.
Applicable standards
The drive complies with the following standards. The compliance with the
European Low Voltage Directive is verified according to standards
EN 61800-5-1 and EN 60204-1.
EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Part 5-1: Safety
requirements – electrical, thermal and energy
EN 60204-1:2006 Safety of machinery. Electrical equipment of machines. Part 1: General
requirements
. Provisions for compliance: The final assembler of the machine
is responsible for installing
- emergency-stop device
- supply disconnecting device
- IP00 drive module into a cabinet.
EN 60529:1992 (IEC 60529) Degrees of protection provided by enclosures (IP code)
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems. Part 1:
Principles, requirements and tests.