abaco systems CR9 Series, Справочник по аппаратуре

Страница: 37 / 91

Publication No. HRMCP9 Rev. B Interfaces 37
9 C/\BE3 IDSEL AD23 GND AD22 GND
8 AD26 GND VIO b AD25 AD24 GND
7 AD30 AD29 AD28 GND AD27 GND
6 \REQ0 \PCI_PRES L+3.3V
a
CLK0 AD31 GND
5 NC NC \RST GND \GNT0 GND
4 IPMI_PWR \HEALTHY LVIO
b
INTP NC GND
3 \INTA \INTB \INTC L+5V a \INTD GND
2 NC +5V NC NC NC GND
1 +5V -12V NC +12V +5V GND
a On long backplane pins for early power supply
b The VIO signals are not used by the CR9. They are either 5 V or 3.3 V, depending on backplane
c These signals are not used on the CR9
d
These SMBus signals are not supported by the IPMI controller on the CT9
5.2.3 I/O Connector J7003, J7004, and J7005
The connector J7004 is not mounted on the CT9, if the H110-Bus is used on the
backplane. For easy use a transition module is available from Abaco to connect the
I/O-Connectors with standard connectors.
Table 5-3 I/O Connectors J7003, J7004, and J7005
J7003 A B C D E F
19 GND GND GND GND GND GND
18 LPA_DA- GND LPA_DC- GND
17 LPA_DB- GND LPA_DD- GND
16 LPB_DA- GND LPB_DC- GND
15 LPB_DB- GND LPB_DD- GND
14 VCC3
a
VCC3
a
VCC3
a
VCC
a
VCC
a
GND
13 PMC1IO_05 PMC1IO_04 PMC1IO_03 PMC1IO_02 PMC1IO_01 GND
12 PMC1IO_10 PMC1IO_09 PMC1IO_08 PMC1IO_07 PMC1IO_06 GND
11 PMC1IO_15 PMC1IO_14 PMC1IO_13 PMC1IO_12 PMC1IO_11 GND
10 PMC1IO_20 PMC1IO_19 PMC1IO_18 PMC1IO_17 PMC1IO_16 GND
9 PMC1IO_25 PMC1IO_24 PMC1IO_23 PMC1IO_22 PMC1IO_21 GND
8 PMC1IO_30 PMC1IO_29 PMC1IO_28 PMC1IO_27 PMC1IO_26 GND
7 PMC1IO_35 PMC1IO_34 PMC1IO_33 PMC1IO_32 PMC1IO_31 GND
6 PMC1IO_40 PMC1IO_39 PMC1IO_38 PMC1IO_37 PMC1IO_36 GND
5 PMC1IO_45 PMC1IO_44 PMC1IO_43 PMC1IO_42 PMC1IO_41 GND
4 PMC1IO_50 PMC1IO_49 PMC1IO_48 PMC1IO_47 PMC1IO_46 GND
3 PMC1IO_55 PMC1IO_54 PMC1IO_53 PMC1IO_52 PMC1IO_51 GND
2 PMC1IO_60 PMC1IO_59 PMC1IO_58 PMC1IO_57 PMC1IO_56 GND
1 PMC1VIO PMC1IO_64 PMC1IO_63 PMC1IO_62 PMC1IO_61 GND
a for internal use only