PBX Installation Information
1-23
41-001390-00 Rev 02 – 12.2011
Configuration Server Requirements
A basic requirement for setting up the BluStar 8000i is to have a ftp, tftp, http, or https configuration file server (http rec-
ommended). On the server you need to have the following files:
aastra.cfg
<model>.cfg
<mac>.cfg
In one of the above files (e.g. the <mac>.cfg file), you must have the BluStar 8000i user configuration URL that specifies
where to look for the following file:
<user>.cfg
See
Installing the Configuration Files
for more information.
If HTTP/HTTPS is used to push the <user>.cfg file to the server, then the following two files need to be in a folder speci-
fied by the BluStar 8000i user configuration URL:
upload.html
upload_file.php
Reference
To set the protocol for your configuration server, see
Configuring the Configuration Server Protocol
.
Notes:
•
To obtain these two files, contact Aastra Telecom Support.
•
Hot desking will not work when using the HTTP/HTTPS configuration protocol without these two files properly
installed on the HTTP configuration server.
•
PHP has to be installed on the server and the folder has to allow writing.
