BluStar 8000i Settings
4-25
41-001390-00 Rev 02 – 12.2011
Picture ID Feature
The Picture ID feature on the BluStar 8000i shows a picture ID of a caller on the LCD for all of the following events:
•
Incoming calls (matched to caller ID numbers)
•
Outgoing calls (matched to dialed numbers)
•
Directory entries
•
Callers list entries
•
Redial list entries
The pictures are stored in a centralized picture repository and are dynamically retrieved from the centralized server for
each call and then locally cached in the BluStar 8000i to reduce network traffic.
If there is no picture on the central server for the dialed and/or caller ID number, directory, callers list,
and/or redial list entry, the generic blue figure image is shown.
Pictures can be in either “png”, “gif”, or “jpeg” formats, but must be named “.png”, up to 320 pixels wide x
320 pixels tall, and in 24 bit color.
The filenames for pictures must be stored using the phone number as the filename using only digits (for
example, 9995551234.png).
To Enable/Disable Picture ID:
Enabling the picture ID feature on the BluStar 8000i can be done using the “
image server uri
” parameter. Entering no
value for this parameter disables the feature. The parameter format is the following:
image server uri: protocol://[username]:[password]@server.[port]
Use the following procedure to enable the picture ID feature
.
Note:
The picture ID feature supports the use of FTP, HTTP, and HTTPS protocols when downloading pictures.
Configuration Files
For the specific parameter(s) you can set in the configuration files, see Appendix A, the section,
Generic
Blue Image
