7.Playback Recorded Data - 7.2.Playback Recorded Data
54
1WMPD4004445
7.2.2. Cursors
When CURSOR is selected for the Control bar switching on the right edge of the control bar, the
A and B time axis cursors are displayed.
Cursor A
Cursor B
Turn the rotary knob to move
the cursors.
(1)
(2) (3) (4) (5)
(1) Cursor position data information
A:
Recorded data information of the cursor A position
X is the time from the first of cursor A, and Y is the data value at the position of cursor A.
B:
Recorded data information of the cursor B position
X is the time from the first of cursor B, and Y is the data value at the position of cursor B.
A-B: Information on the difference between cursors A and B
X is the time between cursors A and B, and Y is the data difference value between cursors A
and B.
b/w AB: The maximum value (MAX), minimum value (MIN), and average value (AVG) between cursors
A and B.
However, this is disabled for printer recorded data because the P-P value is used. It is also
disabled when the P-P value is selected for SSD recording.
(2) Jump to cursor key
Tap the key to move the waveform so that the cursor position is in the monitor center.
(3) Move cursor to center key
Tap the key to move the specified cursor to the monitor center.
(4) Cursor selection
Select the cursor to change the cursor position for. The cursor changes in the order
A
⇒
B
⇒
A-B each tap.
Turn the rotary knob with A selected to move cursor A.
Turn the rotary knob with B selected to move cursor B.
Turn the rotary knob with A-B selected to move with the distance between cursor A and cursor B
maintained.
Содержание RA3100 Omniace
Страница 1: ...RA3100 Omniace Simple Instruction Manual 1WMPD4004445 ...
Страница 73: ...8 Specifications 8 3 Exterior 1WMPD4004445 73 8 3 Exterior 8 3 1 Main Unit Exterior 394 199 410 334 ...
Страница 74: ...8 Specifications 8 3 Exterior 74 1WMPD4004445 MEMO ...
Страница 75: ...Omniace RA3100 Simple Instruction Manual 1WMPD4004445 1st Edition ...