A&D RA3100 Omniace Скачать руководство пользователя страница 69

Страница: 69 / 76

8.Specifications -8.2.Functional Specifications

1WMPD4004445

8.2.9. Setup / Record Management

Item

Specifications

Recording Setup

Recording

Mode

Nine type recording mode display and selection.

Data name

Recording name, automatic numbering.

Recording time

Recording time setting for one time, maximum time settable from
remaining SSD capacity.

Start time

Set the recording start time

Interval time

Set the Interval time and number of recordings

Printer

Enable/disable printer recording when performing measurement,
sheet selection, enable/disable real-time waveform printing during
measurement.

SSD

Enable/disable SSD recording when performing measurement.

Memory

Enable/disable memory recording when performing measurement,
record blocks, points, endless mode, pre-trigger settings.

Thumbnails

Sets the channels to displayed in the thumbnails on the monitor
and the compression ratio for the display from 1/10 to 1/100.

Channel List

Common: Displays and configures a list of common Setup set in modules and the

input module installed in this product.

Display items:

Channel number, module type.

Display items and settings: Channel name, measurement, sheet,
color, display position, display range, display maximum, and display
minimum.

Conversion: List of physical conversion for the installed analog input module.

Display items and settings:

Conversion method (2-pt /gain),

conversion value (conversion 1, conversion 2), unit.

List by input module type:

Displays and configures a list of the settings unique to each module.
Each item can be configured individually or together.

Sheet

List of registered channels and channel registration to sheets 1 to 3

Printer

Printing:

Print settings for the header, annotation, footer, grid, date,
recording name, time axis, and recording speed printed at the
same time as the printer printing

Text settings:

Inputs and imports/exports text for printing headers,

annotations, and footers
60 characters for the text (in the paper feed direction) x 86 lines
(waveform amplitude direction)

Chart speed:

Sets a user-defined chart speed. Six speed settings can be set.

Содержание RA3100 Omniace













































































Результаты поиска

Содержание RA3100 Omniace

Отзывы:

Бренды по названию

Популярные бренды

A&D RA3100 Omniace, Простое руководство пользователя

Результаты поиска

Содержание RA3100 Omniace

Отзывы:

Бренды по названию

Популярные бренды