1.Name and Function of Each Block - 1.3.Operation Panel
16
1WMPD4004445
1.3. Operation Panel
SD
TRIG
START
STOP
DISK
(1) SD card slot
Used to save recorded data to an SD memory card, etc.
(2) USB
Used to save recorded data to USB memory, etc. in the same manner as to an SD
memory card.
(3) Rotary knob
Used to select the module ranges and setting values by turning it clockwise and
counterclockwise.
When the rotary knob is enabled, the area around the knob lights in the blue color
of the normal mode.
Push the rotary knob to switch the area around the knob to the orange of the fine
adjustment mode.
Push it again to return the area around the knob to the blue color of the normal
mode.
(4) PRINT key
Outputs the waveform recording to the printer.
Press the PRINT key to start waveform recording and again to end recording.
You can also press the STOP key to end recording. Press and hold
the PRINT key to output a copy of the screen (screenshot) to a printer, which
can be saved to the main unit or external media in the .png file format.
(5) TRIG key
Outputs a forced trigger during measurement.
The TRIG LED lights when a trigger is detected.
(6) START key
Starts measurement.
(7) STOP key
Stops measurement.
(8) DISK access light
The LED lights when accessing the internal SSD (for reading or writing).
(9) Power switch
Turns the power of the main unit on/off.
The [Shut down] screen is displayed when turning the power off. Press the OK
button to complete the shutdown process.
If this Power switch is pressed again while the [Shut down] screen is displayed,
the product automatically shuts down.
Содержание RA3100 Omniace
Страница 1: ...RA3100 Omniace Simple Instruction Manual 1WMPD4004445 ...
Страница 73: ...8 Specifications 8 3 Exterior 1WMPD4004445 73 8 3 Exterior 8 3 1 Main Unit Exterior 394 199 410 334 ...
Страница 74: ...8 Specifications 8 3 Exterior 74 1WMPD4004445 MEMO ...
Страница 75: ...Omniace RA3100 Simple Instruction Manual 1WMPD4004445 1st Edition ...