A&D FZ-i WP Series, Инструкция по эксплуатации

Страница: 5 / 96

5
1.
INTRODUCTION
This manual describes how the FZ-
i
/ FX-
i
/
FZ- i WP
/
FX- i WP
/
FZ-GD
/
FX-GD
series balance works
and how to get the most out of it in terms of performance.
Read this manual thoroughly before using the balance and keep it at hand for future reference.
1.1. About This Manual
This manual consists of the following five parts:
Basic operation ......................... Describes precautions on handling the balance, balance
construction and basic balance operation.
Adapting to the environment .... Describes response adjustment and calibration.
Functions .................................. Describes various functions of the balance.
RS-232C serial interface .......... Describes the interface which transmits data and controls the balance.
Maintenance ............................. Describes maintenance, error codes, troubleshooting,
specifications and options.
1.2. Features

Compact general-purpose balance, can be installed almost anywhere.

The FZ-
i
/ FZ-
i
WP / FZ-GD series balance is equipped with an internal mass for one-touch
calibration.

Casing construction, strong protection against dust and moisture.

Stabilization time of one second. When FAST is selected for the response rate, a stabilization
time of one second, to read a displayed value after a sample is placed on the pan, has been
achieved.

Multiple weighing units with most of the common units used around the world.

Standard RS-232C serial interface to communicate with a computer and to output the Good
Laboratory Practice (GLP) / Good Manufacturing Practice (GMP) compliant report.

Statistical calculation mode to statistically calculate the weight data, and display or output the
sum, maximum, minimum, range (maximum-minimum), average, standard deviation and
coefficient of variation.

Comparator ndicators for displaying the comparison results using HI , OK and LO .

Hold Function, provided for weighing a moving object such as an animal.

Breeze break, provided for the 120/200/300 of the FZ-
i
series, FZ-
i
WP series and FZ-GD
series (including 500 for the FX-
i
series), for more accurate weighing.

Underhook, provided for suspended weighing.

As options, the USB interface (FX i -02), the Ethernet interface (Fx i -08) and the built-in battery
unit (Fx i -09) are available. * Using these options with the FZ- i WP / FX- i WP series prevent the
balance from having dustproof and waterproof performance.
Connecting the USB interface, by cable to a Windows computer, allows transmission of the weight
data to Excel or Word. The Ethernet interface allows connection of the balance to a personal
computer through a LAN. The battery unit allows use of the balance where a power source is not
available.

The AD-8920A remote display, that is sold separately, allows reading the weight value in a place
away from the balance.