A&D AS2503, Инструкция по эксплуатации

Страница: 40 / 90

３－１０
3.5 How to Switch Special Function Setting
By switching dip switches on the bottom face of the AS amplifier, settings for special functions can
be made.
- ON/OFF for wire length adjustment
- ON/OFF for wire disconnection check function
- Decimal point shift for digital monitor
③
Dip switch Function Description
Factory-set
(Factory-set settings)
Wire length adjustment function: (Switch 1
is Off.)
Wire disconnection check function: ON
(Switch 2 is On.)
Decimal point of digital monitor
③
,
displaying decimal point at the fourth place:
10.000 (Switches 3 and 4 are On.)
Wire length adjustment function
(Switch 1 changeover)
Wire length adjustment function: OFF
(Switch 1 up: Off)
Wire length adjustment function: ON
(Switch 1 down: On)
Wire disconnection check
function
(Switch 2 changeover)
Wire disconnection check function: OFF
(Switch 2 up: Off)
Wire disconnection check function: ON
(Switch 1 down: On)
Decimal point indication
(Setup through the combinations
of switches 3 and 4)
Displaying the decimal point of digital
monitor
③
at the third place: 100.00
Decimal point indication
(Setup through the combinations
of switches 3 and 4)
Displaying the decimal point of digital
monitor
③
at the second place: 100.00
Multipoint indication
(Setup through the combinations
of switches 3 and 4)
No indication of the decimal point on digital
monitor
③
: 10000
Table 3-5
ON/OFF switching for dip switches is possible when the amplifier is turned on.
1 2 3 4
ON↓
1 2 3 4
ON↓
1 2 3 4
ON↓
1 2 3 4
ON↓
1 2 3 4
ON↓
1 2 3 4
ON↓
Front panel
Rear panel
dip switches
Figure 3-6 Position of dip switch