A&D AS2503, Инструкция по эксплуатации

Страница: 13 / 90

９
3. Before Measuring
3.1 Cable Connections ······································································· 3-1
3.1.1 Input Cable Connections ························································· 3-1
3.1.2 Power Supply Cable and Output Cable Connections ····················· 3-2
3.2 Operation before Measuring ··························································· 3-2
3.2.1 Standalone Operation ··························································· 3-2 to 3-3
3.2.2 Measuring Range ······························································ 3-4 to 3-5
3.3 Wire Disconnection Check Function ·················································· 3-6
3.3.1 Overview ··········································································· 3-6
3.3.2 Error Indication List upon Wire Disconnection and Short ················· 3-7
3.4 Wire Length Adjustment Function
····················································· 3-8 to 3-9
3.5 How to Switch Special Function Setting
············································· 3-10
3.6 Cases
······················································································ 3-11
3.6.1 Names of Case Elements
······················································ 3-11
3.6.2 How to Use Case
································································ 3-11 to 3-13
3.6.3 Heat Release for Case
·························································· 3-14 to 3-15
4. Measurement
4.1 Cautions before Measuring
····························································· 4-1 to 4-2
4.2 Input Connection
········································································· 4-3
4.2.1 Examples of Strain Gauge Bridge Configurations
·························· 4-3 to 4-5
4.2.2 Bridge Box
········································································· 4-6 to 4-8
4.2.3 Measurement with Transducer
················································ 4-8 to 4-9
4.2.4 When using AS Series amplifire as DC amplifire
··························· 4-9 to 4-11
4.3 Connection of Output to Load
·························································· 4-12
4.3.1 Connection of Output to Data Recorder
····································· 4-12 to 4-13
4.4 How to Read Measured Values
························································ 4-13 to 4-15
4.4.1 Correction of Calibration (CAL) Values
······································· 4-15 to 4-16
4.5 Special Applications
····································································· 4-17
4.5.1 Configuring two or more bridges using a single power supply
··········· 4-17
4.5.2 Special use of transducer
······················································· 4-17 to 4-18
5. Operation Theory
5.1 Flow of Measured Signal ····························································· 5-1 to 5-2