A3 Smart Home Qolsys IQ Panel 2, Руководство по установке

Страница: 34 / 177

INSTALLER/DEALER SETTINGS
Setting Default Description
Jam Detection Local Alarm
NOTE: Not evaluated by UL/cUL
Disabled
When enabled the system will sound a local alarm. “Jam Detection” must be active for this to
function properly
RF Jam Sensitivity Level Normal Choose between HIGH and NORMAL sensitivity levels
Allow Master Code to Access Security
Sensors
Disabled
Allow the Master Code to access to the Security Sensor icon, including Auto Learn Sensor, Add
Sensor, Edit Sensor, Delete Sensor, Sensor Status & Sensor Group
Open/Close Reports Allowed For Auto
Learn
Enabled
Rather than sending a tamper to auto learn a sensor, enabling this will allow an open/close of the
sensor to trigger auto learn
Panel Glass Break Detector Disabled
Creates an independent zone that leverages the panel’s built-in microphones to act as a glass break
detector. This will fall into the zone order at the time you enable this feature.
NOTE: This feature can
not be Enabled if Panel Ambient Noise Detection is Enabled.
Panel Motion Detector Disabled
Creates an independent zone that leverages the panel’s built-in camera to act as an activity motion
detector. This will fall into the zone order at the time you enable this feature. Motion can trip once
every 4 minutes.
NOTE: The panel motion detector is for activity monitoring and automation only
(Group 25) and will not create an alarm condition or act as a security PIR. This feature can not be
Enabled if Panel IP Camera is Enabled.
Panel Ambient Noise Detector (beta) Disabled
When Enabled, the Panel's built-in microphones can monitor for loud noise detection above a
settable dB threshold and generate an alert. Useful for MDU, apartments and short term rentals
where noise complaints are a concern. After an alert is generated, a 30 second cool down period is
instituted.
NOTE: This feature can not be Enabled if Panel Glass Break Detector is Enabled.
PROGRAMMING