A3 Smart Home Qolsys IQ Panel 2, Руководство по установке

Страница: 33 / 177

INSTALLER/DEALER SETTINGS
Setting Default Description
Thermostat Page Enabled
Choose whether or not you want the “Thermostat Page” to appear as part of primary user interface
on the panel anytime a Thermostat is added as a device.
Scenes Support Disabled
When enabled, a new icon will appear in the panel UI on left hand footer enabling the use of Scenes
that have been created on Alarm.com.
NOTE: This feature can not be enabled if Partitions are
enabled.
Panel IP Camera Disabled
This setting allows the built-in Panel Camera to act as an IP Camera. When Enabled, the Panel
Camera will show up in Alarm.com as a camera that can be added to the account.
NOTE: This
feature can not be Enabled if Panel Motion Detector is Enabled.
Stream Live Video Cameras to IQ Remote Disabled
This setting allows a user to view cameras from the IQ Remote. When enabled, Cameras that are
streaming to the primary panel will also stream to the IQ Remote.
PowerG RF Jam Detection Disabled
When enabled the system can detect when an unusual amount of RF signals are being transmitted in
the PowerG spectrum leading to a potential panel malfunction. This event reports to the central
station when enabled. Choose from Disabled, UL20/20 or En 30/60.
Jam Detection Disabled
When enabled the system can detect when an unusual amount of RF signals are being transmitted
on the frequency of the legacy daughter card installed in the panel (319.5MHz, 345MHz or 433MHz)
leading to a potential panel malfunction. This event reports to the central station when enabled.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 33 177
PROGRAMMING