A3 Smart Home Qolsys IQ Panel 2, Руководство по установке

Страница: 29 / 177

INSTALLER/DEALER SETTINGS
Setting Default Description
Loss of Supervisory Signals for Non
Emergency Sensors
24
Select the length in hours (4, 12, 24) before reporting a loss of supervision on security devices.
NOTE: For UL/cUL Resi Fire and UL Commercial Burg (UL1610) the wireless supervision window for
Non-Emergency sensors (all intrusion sensors) shall be set to 4h
Loss of Supervisory Signals for PowerG
Non Emergency Sensors
24
Select the length of time (20, 30 min, 1, 2, 4, 12, 18 hours) before reporting a loss of supervision on
PowerG security devices.
NOTE: For UL/cUL Resi Fire and UL Commercial Burg (UL1610) the wireless supervision window for
Non-Emergency sensors (all intrusion sensors) shall be set to 4h
Loss of Cell Signal Timeout 30
Select the length in minutes (10-120) before reporting a loss in cellular signal.
NOTE: For UL Commercial Burg (UL1610) the cell supervision is hardcoded to 200s
Communication Test Monthly Choose Never, Daily, Weekly or Monthly when enabling the communication test.
SIA Limits
NOTE : for UL/cUL set entry delay to 45
sec. and for UL set exit delay to max 120
sec. and for cUL set exit delay to 60 sec.
NOTE: For UL Commercial Burg (UL1610)
Maximum entry and exit delay should not
exceed 60s.
Enabled
When enabled , the range for entry and exit delays is as follows:
-Entry delay: 30-240 seconds, Exit Delay: 45-254 seconds
When disabled , the range for entry and exit delays are as follows:
-Entry delay: 5 to 240 seconds, Exit delay: 5 to 254 seconds
When enabled the range for Dialer Delay is: 15 to 45 seconds
When disabled the range for Dialer Delay is: 0 to 254 seconds
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 29 177
PROGRAMMING