A3 Smart Home Qolsys IQ Panel 2, Руководство по установке

Страница: 116 / 177

QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 116 177
SENSOR TEST FIND IT
SYSTEM TESTS
Swipe down for
access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
Colored points on the graph represent each state change or supervisory signal transmitted
from a sensor to the panel. Points are colored based on frequency.
The YELLOW line represents a dBm level where signal strength is “Poor” and potential RF
failures could occur. This line dynamically adjusts to 12 dBm above the ambient RF noise
floor in the environment.
The RED line represents a dBm level where signal strength is “Critical” and RF failures are
likely. This line dynamically adjusts to 6 dBm above the ambient RF noise floor in the
environment.
TROUBLESHOOTING:
If a sensor falls below the yellow line,
try changing it’s orientation (vertical/
horizontal), move the sensor to a
di
ff erent part of the door/window or
adjust the panel’s
RF pigtail antenna.
Then re-test to see the if the result
improved.
SENSOR TEST
NOTE: Manufacturer recommended signal to
noise ratio is min 7dB
SYSTEM TESTS