A-Neuvideo ANI-41STREAM, Инструкция по эксплуатации

Страница: 19 / 44

17
WebGUI Control
2. Time Configuration:
• Date & Time: The unit’s time and date can be manually configured here if an internet
connection, or NTP server is not available. Click on the calendar icon ( ) to open the time
and date configuration screen and select the preferred values. After entering a new time and
date, click the “Save” button to store it in the unit and start the clock running.
3. Daylight Saving Time Configuration: Enable or disable the use of DST adjustments for the
unit’s time.
Note: Enabling Daylight Saving Time while outside the configured DST range will result in no change
to the current time.
• Start Time: Set the month, week, day and time for the start of DST in the current time zone.
• End Time: Set the month, week, day and time for the end of DST in the current time zone.
• Adjust Time: Set the amount of time to add when DST is active.
Trigger Setting Tab
This tab allows user to define the action taken when any of the 8 trigger pins within the Trigger
Terminal Block are activated.
1. Set Trigger Input: Use the dropdown next to each Trigger (1~8) to assign an action to perform
when that trigger is activated.
AVAILABLE TRIGGER ACTIONS
Transmitter HDBT OUT Select DP
Transmitter HDBT OUT Select USB-C
Transmitter HDBT OUT Select HDMI
Transmitter HDBT OUT Select VGA
Transmitter Auto Switch On
Transmitter Auto Switch Off
Transmitter Audio Mute On
Transmitter Audio Mute Off
Transmitter Video Mute On