28
Serial & Telnet Commands
COMMAND
DESCRIPTION
SET ALL IN EDID MODE
N1
Select the EDID management mode to use (All or Appoint) for all
inputs.
Available values for
N1
:
ON [All mode]
OFF [Appoint mode]
GET ALL IN EDID MODE
Show the current EDID management mode used by all inputs.
SET ALL IN EDID N1
Set the EDID to use when the
“All”
EDID mode is active.
Available values for
N1
:
1 [FHD 2CH] 6 [User EDID2]
2 [FHD MCH] 7 [User EDID 3]
3 [4K UHD 2CH] 8 [User EDID 4]
4 [4K UHD MCH] 9 [Sink EDID]
5 [User EDID 1]
Содержание ANI-41STREAM
Страница 34: ...32 CONNECTION DIAGRAM ...
Страница 42: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...
Страница 43: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...