A-Neuvideo ANI-41STREAM, Инструкция по эксплуатации

Страница: 12 / 44

10
WebGUI Control
On the left side of the browser you will see the following menu tabs
where all primary functions of the unit are controllable via the built in
WebGUI. The individual functions will be introduced in the following
sections.
Clicking the red “Logout” tab will automatically log the currently
connected user out of the WebGUI and return to login page.
Live Tab
This tab provides viewing access to the first local video stream channel (of 4 channels total) generated
by the unit. The video source can be selected here and the stream resolution, framerate and bitrate
is also displayed. At the bottom of the page, a connection address for local video stream channel 1
is displayed in the format: “rtsp://xxx.xxx.xxx.xxx/live/ch1/h264_aac” (xxx.xxx.xxx.xxx = the unit’s
current IP address). When 3rd party video player
software with RTSP streaming support is used to view streams from this unit, this is the URL that
should be used to connect. To view streaming channels 2~4, change “ch1” in the address to “ch2” ,
“ch3” , or “ch4” , as appropriate.
Note: The Channel 1 configuration is set on the “Record Setting” tab. Channels 2~4 contain the
same video content presented at different streaming resolutions. Channel 2 is 1920x1080@30fps,
Channel 3 is 640x480@30fps, and Channel 4 is 320x240@30fps.