22
Serial & Telnet Commands
COMMAND
DESCRIPTION AND PARAMETERS
SET IP MODE N1
Set the IP address assignment mode.
Available values for
N1
:
0 [Static IP]
1 [DHCP]
GET IP MODE
Show the current IP address assignment mode.
GET IPCONFIG
Show the unit’s current IP configuration information.
SET IP ADDR N1
Set the unit’s static IP address.
N1
= X.X.X.X [X = 0~255]
GET IP ADDR
Show the unit’s current IP address.
SET NETMASK N1
Set the unit’s static netmask.
N1
= X.X.X.X [X = 0~255]
GET NETMASK
Show the unit’s current netmask.
SET GATEWAY N1
Set the unit’s static gateway address.
N1
= X.X.X.X [X = 0~255]
GET GATEWAY
Show the unit’s current gateway address.
GET TELNET MAXIMUM
USER
Show the maximum number of users allowed to connect
simultaneously via Telnet.
SET WEBGUI PASSWORD
N1
Set WebGUI administrator password.
N1
= {Password} [16 characters max]
GET WEBGUI PASSWORD
Show the current WebGUI administrator password.
GET HOSTNAME
Show the unit’s current hostname.
SET WEBGUI LOGIN
TIMEOUT N1
Set the WebGUI inactivity timeout value.
Available values for
N1
:
0 [No timeout]
1~60 [Timeout in minutes]
GET WEBGUI LOGIN
TIMEOUT
Show the current WebGUI inactivity timeout value.
SET IN N1 NAME N2
Set the name of the specified input.
Available values for
N1
:
1 [DisplayPort input]
2 [USB-C input]
3 [HDMI input]
4 [VGA input]
N2
= {Name} [8 characters max]
Содержание ANI-41STREAM
Страница 34: ...32 CONNECTION DIAGRAM ...
Страница 42: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...
Страница 43: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...
