A-Neuvideo ANI-41STREAM, Инструкция по эксплуатации

Страница: 18 / 44

16
WebGUI Control
Note: The target folder on the CIFS server must, at a minimum, provide read, write and delete
permissions for the designated user.
• Username/Password: Enter the user name and password required for access to the specified
server. After entering both items, press the “Save” button.
9. Schedule Record Timer: Enable or disable the scheduled time recording function. Each hour
of each day is divided into two half-hour blocks. Currently selected recording times are indicated
by orange blocks. Gray blocks indicate that no recording is currently scheduled. Blocks may be
activated or deactivated by clicking on them. To easily select multiple blocks, you may click and drag
across the preferred range. After setting the preferred recording blocks, press the “Save” button. To
undo changes and return to the previous schedule configuration, press the “Revert” button.
Time Setting Tab
The Time Settings tab provides a way to set the system’s time, date, and time zone. The system
time can be set manually, or automatically using a defined SNTP server. If your country uses DST
(Daylight Saving Time) you can enable or disable it here and configure the start and end times/dates
so that your scheduled events will always occur at the correct times throughout the year.
1. SNTP Configuration:
• GMT: Select the preferred time zone from the options in the dropdown.
• NTP Server: Enter the address of the network time server to use for automatic time and
date configuration. Click the “Save” button to set and store the address in the unit. Click the
“Sync” button to force synchronization of the unit’s time and date with the defined server.
Note: Time synchronization occurs automatically when the unit is first powered on, and every
24 hours afterwards, if an NTP server has already been defined. Synchronization requires a live
connection to the internet.
• Server Time: Shows the unit’s current time and date.