A-Neuvideo ANI-41STREAM, Инструкция по эксплуатации

Страница: 8 / 44

OPERATION CONTROLS & FUNCTIONS
Front Panel
q
PWR. LED: This LED will illuminate to indicate the unit is on and receiving power.
w
SERV. Port: Attach a standard USB thumb drive or external hard drive for storage of recorded
video. (Optional)
Note: Storage media must be formatted as FAT32 or exFAT. Video files are stored in *.mp4 format.
e
RECORD LED: This LED will blink while video recording is active.
RECORD START BUTTON: Press this button to immediately start recording to the designated
recording target.
RECORD STOP BUTTON: Press this button to immediately stop any current recording session.
RECORD SOURCE BUTTON: Press this button to sequentially switch through the available inputs.
Note: Changing the input source will cause the video stream to restart. Connected stream targets
may need to be restarted or reconnected.
r
DP INPUT PORT & LED: Connect to DisplayPort source equipment such as a PC or laptop. The
LED will illuminate amber when a source is detected and green when the source is selected.
t
USB-C INPUT PORT & LED: Connect to USB Type-C video source equipment such as a PC
or laptop. The LED will illuminate amber when a source is detected and green when the source is
selected.
Note: Not all devices with USB Type-C ports can support video output. Please verify that the device
supports video output from the USB Type-C port before connecting it.
y
HDMI INPUT PORT & LED: Connect to HDMI source equipment such as a media player, game
console, or set-top box. The LED will illuminate amber when a source is detected and green when
the source is selected.
u
VGA INPUT PORT & LED: Connect to VGA source equipment such as a PC or laptop. The LED
will illuminate amber when a source is detected and green when the source is selected.
i
AUDIO INPUT PORT: Connect to the stereo analog output of the device connected to the VGA
input port.
Note: Audio from this port is embedded with the VGA video source.
6