18
A
NEU
VIDEO
Serial & Telnet Commands
COMMAND
DESCRIPTION AND PARAMETERS
SET IN N1 NAME N2
Set the name of the specified input.
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
N2
= {Name} [8 characters max]
GET IN N1 NAME
Show the current name of the specified input.
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
GET IN NAME LIST
List the names of all inputs on the unit.
SET OUT A NAME N1
Set the name of the output.
N1
= {Name} [8 characters max]
GET OUT A NAME
Show the current name of the output.
GET OUT NAME LIST
List the names of all outputs on the unit.
SET OUT AUTO MODE N1
Set the auto switching behavior of the unit.
Available values for
N1
:
0 [Disabled]
1 [Auto switch]
GET OUT AUTO MODE
Show the current auto switching mode of the unit.
GET OUT AUTO MODE LIST
List all available auto mode options.
GET IN N1 HACTIVE
Show the horizontal active pixel value of the specified input’s current video source.
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
GET IN N1 VACTIVE
Show the vertical active pixel value of the specified input’s current video source.
Available values for N1:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
G
ET IN N1 REFRESH RATE
Show the refresh rate of the specified input’s current video source.
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
GET IN N1 INTERLACE
Show the interlace state of the specified input’s current video source.
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
GET IN N1 SYNC STATUS
Show the current sync state of the specified input.
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
GET IN N1 TIMING
Show the index number of the current resolution detected on the specified input.
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
GET IN N1 UNI TIMING
Show the index number of the current resolution detected on the specified input.
(Universal index number)
Available values for
N1
:
1 [DisplayPort input] 3 [HDMI input]
2 [USB-C input] 4 [VGA input]
Содержание ANI-28UHDDA
Страница 25: ...23 CONNECTION DIAGRAM A NEUVIDEO...
Страница 31: ...THIS PAGE IS INTENTIONALLY LEFT BLANK...
