A-Neuvideo ANI-28UHDDA, Инструкция по эксплуатации

Страница: 23 / 32

21
A NEU VIDEO
Serial & Telnet Commands
COMMAND DESCRIPTION AND PARAMETERS
GET SINK A EDID INFO

Show English readable details from the EDID of the display connected to the
output.
SET IN N1 EDID N2

Set the EDID to use on the specified input.
Available values for N1 :
1 [DisplayPort input]
2 [USB-C input]
3 [HDMI input]
Available values for
N2 :
1 [FHD 2CH]
2 [FHD MCH]
3 [4K UHD 2CH]
4 [4K UHD MCH]
5 [User EDID 1]
6 [User EDID2]
7 [User EDID 3]
8 [User EDID 4]
9 [Sink EDID]
GET IN N1 EDID

Show the EDID currently being used on the specified input.
Available values for N1 :
1 [DisplayPort input]
2 [USB-C input]
3 [HDMI input]
GET IN EDID LIST

List all available EDID selections.
SET EDID N1 NAME N2

Set the name for the specified EDID.
Available values for N1 :
5 [User EDID 1]
6 [User EDID 2]
7 [User EDID 3]
8 [User EDID 4]
N2
= {Name} [16 characters max]
Note: Only User EDIDs may be renamed.
GET EDID N1 NAME

Show the current name of the specified EDID.
Available values for N1 :
5 [User EDID 1] 7 [User EDID 3]
6 [User EDID 2] 8 [User EDID 4]
SET USER N1 EDID DATA N2

Upload a new EDID (in hex format) for use as the specified User EDID.
Available values for N1 :
1~4 [User EDID number]
N2 = {EDID data} [Comma delimited hex pairs]
GET USER N1 EDID DATA

Show the current contents of the specified User EDID as hex data.
Available values for N1 :
1~4 [User EDID number]
GET IN N1 EDID

Show the EDID currently being used on the specified input.
Available values for N1 :
1 [DisplayPort input]
2 [USB-C input]
3 [HDMI input]
SET RECORD MODE N1

Start or stop recording video to the designated destination.
Available values for N1 :
ON [Start recording]
OFF [Stop recording]
GET RECORD MODE

Show the current recording state.
SET RECORD OVERWRITE N1 
Enable or disable record overwrite support.
Available values for
N1
:
ON [Enable overwriting]
OFF [Disable overwriting]
GET RECORD OVERWRITE 
Show the current state of record overwrite support.