A.M.I Italia Saver One P, Руководство пользователя

Страница: 61 / 81

61
12.3 C
LEANING
The structure of the Saver One P defibrillator, including the connection port of the defibrillation electrodes, can be
sanitized using a soft cloth dampened with one of the cleaning solutions listed below:
a) Isopropyl alcohol (70% solution)
b) Soapy water
c) Bleach (30 ml per litre of water)
d) Detergents containing ammonia
e) Detergents containing glutaraldehyde
f) Hydrogen peroxide
Do not immerse the Saver One P in any liquid
Do not use abrasive materials or detergents, strong solvents, such as acetone or acetone-based detergents,
and enzymatic detergents.
Do not sterilize the
Saver One P or its accessories
12.4 S
TORAGE
The Saver One P must be stored in a place where the environmental and safety conditions indicated in the table
below are complied with, according to the temperature and humidity indicated in chapter 13.2. If installed it is
advisable to keep the device with the battery always inserted to allow it to carry out the periodic self-diagnostic tests.
For easy retrieval of the device in case of a rescue, place it in an easily accessible place and so that the control LEDs
are clearly visible.
Do not use, install or
store the
Saver One P in
conditions of
temperature or humidity
that exceed the ranges
indicated in this user
manual.
Do not install or store the
Saver One P in areas
directly exposed to
sunlight
Do not install or store the
Saver One P in areas
subject to sudden
changes in temperature
or humidity
Do not install or store the
Saver One P near heat
sources
Do not use, install or
store the
Saver One P in
places subject to strong
vibrations
Do not use, install or store
the
Saver One P in
environments with high
concentrations
of
flammable or anaesthetic
gases
Do not install or store the
Saver One P in areas with
a high concentration of
dust
The Saver One P must be
opened for maintenance
only by A.M.I. Italia srl or
personnel
authorised
thereby.