A.M.I Italia Saver One P, Руководство пользователя

Страница: 27 / 81

27
5.4 Q-CPR SENSOR
The Saver One P (Ref: SVP-B0006-Q, SVP-B0006-U-Q, SVP-B0007-Q, SVP-B0007-U-Q) makes it possible to provide
feedback on proper execution of cardiac massage thanks to the proprietary AMI Italia external accessory module
(figure 17) to perform CPR Quality (Q-CPR) to be interposed between the rescuer's hands and the patient's chest.
This external module is able to monitor the quality of the CPR being performed, measuring its depth and frequency,
and to provide this information via Bluetooth to the defibrillator, which will then indicate to the rescuer whether or
not the massage performed meets the indications of the international AHA/ERC resuscitation guidelines, by means of
a graphic bar shown on the display (as reference for the depth of the compressions) and by an acoustic signal (as
reference for the rhythm of the compressions).
For the external accessory module for Q-CPR (Ref. SMT-C14034), in conjunction with compatible defibrillator models,
please refer to the appropriate manual.
No. Image Function
1 CPR Quality Bar
Displays depth of cardiac massage: red insufficient or
excessive depth, orange and yellow intermediate
levels, green adequate depth
2 Blue-Tooth Icon
Indicates that the external Q-CPR module is
connected to the defibrillator
3
LED
(on external Q-CPR
module)
LED flashing: indicates that the
Q-CPR module is on but not connected to the
defibrillator.
LED steady on: indicates that the
Q-CPR module is connected to the defibrillator.
4
Power on lever
(on external Q-CPR
module)
Power on lever on the Q-CPR module: by pushing this
lever in, the module turns on; by pulling the lever
out, the module turns off (in this case, make sure that
the LED (3) is off).
Figure 16
1
2
Figure 17
4
3