A.M.I Italia Saver One P, Руководство пользователя

Страница: 57 / 81

57
11.2 P
RINTING OF RESCUE DATA
The Saver One P defibrillator allows you to print data stored in the memory directly from the device by using the
portable thermal printer model Martel MCP7830 (SAV-C1070)
Rescue data can only be printed if the data has been previously stored on the memory card.
To proceed with data printing, the operator must perform the following operations:
1 Install the printer (Saver One P >> >> Martel MCP7830 communication)
2 Select the data to be printed (print data search)
3 Proceed with printing
11.2.1 Martel MCP7830 Printer Installation
For more information on the Martel MCP7830 (SAV-C1070) portable printer, refer to its user manual
1 Preparation for printing
o
Make sure the printer battery is charged and working
o
Insert the paper roll
o
Position the printer so that its IrDA port is in line with that of the Saver One P
2 Turn on the Martel MCP7830 printer
The three LEDs will blink asynchronously and the first LED will turn on with steady green light to confirm that the
printer has switched on.
2 Turn on the Saver One P
When turned on, the
Saver One P will automatically detect the printer and be ready to print the stored data.
The correct connection of the printer will be displayed in the settings menu in the print section.
Figure 39