User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
56
CONFIGURING VIDEO LOSS ALARM
Steps:
1)
Enter the Video Loss Setting interface:
Configuration > Advanced Configuration> Events > Video Loss
Figure 6-‐45
Video Loss
2)
Check the
Enable Video Loss Detection
checkbox to enable the video loss detection.
3)
Click
to edit the arming schedule for video loss detection. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Step 2
Set the Arming Schedule for Motion Detection
in
Section
6.6.1.
4)
Check the checkbox to select the linkage method taken for the video loss alarm. Notify
surveillance center, send email and trigger alarm output are selectable. Please
Step 3
Set
the Alarm Actions for Motion Detection
in
Section
6.6.1
.
5)
Click
to save the settings.
CONFIGURING VIDEO TAMPERING ALARM
Purpose:
You can configure the speed dome to trigger the alarm actions when the lens is covered.
Steps:
1)
Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering