User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
50
Figure 6-‐36
3D Digital Noise Reduction
NOTE:
This function varies depending on the models of speed dome.
!
De-‐fog Mode -‐
When there is fog in the image, you can enable this function to get clear image.
!
EIS -‐
The live view image would be trembled and dim when the camera is shocked slightly in
some monitoring conditions. And the electronic image stabilization (EIS) function is used to
overcome this problem to ensure a steady and clear image.
!
Chroma Suppress -‐
The
Chroma Suppress
level ranges from 0 to 100 as shown in Figure 6-‐37.
Figure 6-‐37
Chroma Suppress
NOTE:
This function varies depending on the models of speed dome.
Video Adjustment
!
Mirror -‐
If you turn the
MIRROR
function on, the image will be flipped. It is like the image in the
mirror. The flip direction can be set to OFF, LEFT/RIGHT, UP/DOWN or CENTER.
NOTE:
This function varies depending on the models of speed dome.
!
Video Standard -‐
You can set the
Video Standard
to 50hz(PAL) or 60hz(NTSC) according to the
video system in your country.
NOTE:
This function varies depending on the models of speed dome.
Other
!
Lens Initialization -‐
The lens operates the movements for initialization when you check the check
box of
Lens Initialization.
!
Zoom Limit -‐
You can set
Zoom Limit
value to limit the maximum value of zooming. The value
can be set to 20, 40, 80, 160 and 320.
NOTE:
This function varies depending on the models of speed dome.
!
Local Output -‐
You can select the output mode to ON or OFF.
CONFIGURING OSD SETTINGS
Purpose:
The speed dome supports following on screen displays:
Zoom:
Identifies the amount of magnification.
Direction:
Displays panning and tilting direction, with the format of PXXX TXXX. The XXX following P
indicates the degrees in pan direction, while the XXX following T indicates the degrees in tilt position.
Time:
Supports for time display.
Preset Title:
Identifies preset being called.
Camera Name:
Identifies the name of speed dome.
You can customize the on screen display of time.
Steps:
1)
Enter the OSD Settings interface:
Configuration > Advanced Configuration > Image > OSD Settings