User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
53
Set the Motion Detection Area.
Steps:
1)
Enter the motion detection settings interface
Configuration > Advanced Configuration> Events > Motion Detection
2)
Check the checkbox of
Enable Motion Detection
.
Figure 6-‐41
Enable Motion Detection
3)
Click
. Click and drag the mouse on the live video image to draw a motion
detection area.
NOTE:
You can draw up to 8 motion detection areas on the same image.
4)
Click
to finish drawing.
NOTE:
You can click
to clear all of the areas.
5)
Move the slider
to set the sensitivity of the detection.
Set the Arming Schedule for Motion Detection.
Steps:
1)
To edit the arming schedule as shown in Figure 6-‐43, click
in Figure 6-‐42.