User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
55
Set the Alarm Actions for Motion Detection.
Purpose:
You can specify the linkage method when an event occurs. The following contents are about how
to configure the different types of linkage method.
Figure 6-‐44
Linkage Method
Check the checkbox to select the linkage method. Notify surveillance center, send email, upload
to FTP, trigger channel and trigger alarm output are selectable.
!
Notify Surveillance Center -‐
Send an exception or alarm signal to remote management
software when an event occurs.
!
Send Email -‐
Send an email with alarm information to a user or users when an event occurs.
NOTE:
To send the Email when an event occurs, you need to refer to Section
6.3.10
Configuring Email Settings
to set the Email parameters.
!
Upload to FTP -‐
Capture the image when an alarm is triggered and upload the picture to a
FTP server.
NOTE:
You need a FTP server and set FTP parameters first. Refer to Section
6.3.8
Configuring FTP Settings
for setting FTP parameters.
!
Trigger Channel -‐
Record a video when an event occurs.
NOTE:
You have to set the recording schedule to realize this function. Please refer to
Section
7.2 Configuring Recording Schedule
for settings the recording schedule.
!
Trigger Alarm Output -‐
Trigger one or more external alarm outputs when an event occurs.
NOTE:
To trigger an alarm output when an event occurs, please refer to Section
6.6.5
Configuring Alarm Output
to set the alarm output parameters.