3Ware 3W-7410 - Escalade 7410 RAID Controller, Руководство пользователя

Страница: 37 / 126

Exiting the 3ware BIOS tool
www.3ware.com 29
Figure 9. 3ware BIOS Tool
Press Alt-3 immediately to bring up the 3ware Disk Array Configuration
display.
Note:
If drives are attached and you do not want to install the
3ware BIOS, press Alt-b to bypass the BIOS installation. This is
useful when booting temporarily from another device.
Exiting the 3ware BIOS tool
To save your configuration modifications press the F8 key. After you have
pressed the F8 key to commit your changes, a list of affected drives will be
displayed and you will be asked to confirm your configuration. The booting
process will resume.
To exit the 3ware Disk Array Configuration Utility without saving your
changes press Esc .
Determining your configuration
Caution:
Configuring a disk array or hot spare writes format-type data onto
its member disks and overwrites all the files on those disks. Be sure
to back up data that requires retention.
■
All supported RAID levels (0,1,5,10) can be created based on the number
of drives that the ATA RAID Controller supports.
■
Multiple arrays of supported RAID levels can be implemented on a single
controller based on the number of drives that the ATA RAID Controller
supports.