3M Tape Application Monitor, Инструкция и перечень запасных частей

Страница: 18 / 62

North American - ENG
Date Released:
05-22-18
TAM Application Monitor - Yype 21800
Page 12
44-0009-2048-6 / ECO# 0078483
Figure 2-12
Upper Dancer Arm Assembly
The upper dancer arm assembly is mounted directly to
the case sealer’s inner column cross-member using one
of the three supplied brackets.
1) Fasten the upper dancer arm assembly to the
appropriate bracket (See Figures 2-12)
using the M6 screws and washers.
2) Remove the tape supply roll from the upper tape drum.
3) Remove the fasteners used to secure the tape drum
bracket to the inner column cross-member of the
case sealer.
4) Place the dancer arm assembly over the tape drum
bracket as shown in Figures 2-12 and attach the
entire assembly using the longer (4) M6 screws and
washers supplied in this kit.
If the dancer arm roller does not align with the tape
drum complete steps 5 and 6
Installation and Set-Up
(continued)