![background image](http://html.mh-extra.com/html/3m/clean-trace-ngi-luminometer/clean-trace-ngi-luminometer_user-manual_3044611003.webp)
SAFETY INFORMATION
Explanation of Signal Word Consequences
WARNING:
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
NOTICE:
Indicates a hazardous situation, which, if not avoided, may result in property damage
Explanation of Safety Related Symbols
WARNING: Read Accompanying Documentation
CAUTION: Recycle Luminometer to avoid environmental contamination
This product contains recyclable parts for information on recycling – please contact
your nearest 3M Service Center for advice.
This system is subject to the European WEEE Directive 2002/96/EC
This product contains electrical and electronic components and must not be
disposed of using standard refuse collection. Please consult local directives for
disposal of electrical and electronic equipment
Class II: Class two insulation referred to as double insulation
Applies to NG Power Supply: Alternating current AC source
WARNING
To reduce the risks associated with hazardous voltage:
• do not service the 3M™ Clean-Trace™ Luminometer, docking station or power supply. Use only 3M authorized
service personnel.
• do not use the 3M™ Clean-Trace™ Luminometer or power supply if the enclosure is broken.
• do not use a damaged power supply or detachable power supply cord.
• replace damaged components with only the 3M designated replacement parts.
• disconnect the 3M™ Clean-Trace™ Luminometer or Docking Station from the AC power before cleaning.
To reduce the risks associated with hazardous voltage and fire:
• do not modify any part of the 3M™ Clean-Trace™ Luminometer system.
• do not use a power supply other than the one specified by 3M.
• do not allow the power supply to get wet.
• keep power supply visible and accessible at all times. The plug at the wall socket is used to disconnect the
device from the main power supply.