3M Bair paws 875 Скачать руководство пользователя страница 5

Страница: 5 / 33

English 202036A

Check the 3M

Bair Paws

system website to ensure you have the most recent version of this document.

www.bairpaws.com reorder #202036A

Introduction to the 3M™ Bair Paws™
Patient Adjustable Warming System

The 3M

Bair Paws

patient adjustable warming system consists of the Model 875 forced-

air warming unit and disposable warming gowns� The Bair Paws Model 875 warming

unit can provide comfort warming and prewarming to patients in preoperative settings� In

postoperative settings the warming unit can provide comfort warming�

This manual includes operating instructions and unit specifications for the Model 875

warming unit� Please refer to the Instructions for Use for more information about the gowns�

The Bair Paws system should only be used by trained medical professionals�

Bair Paws Model 875 Warming Unit

The Bair Paws Model 875 warming unit has

the following key elements: a blower, a heating

element, and a handheld temperature controller�

The warming unit delivers warmed air through

a hose that is connected to a port in a Bair Paws

gown� The patient can adjust the air temperature

and airflow using the temperature controller�

Bair Paws Warming Gowns

The Bair Paws single-use warming gown

completely covers and surrounds the patient

except for the head, hands and feet� The gown

has an integral, channeled insert that delivers

ambient and warm air through small perforations

to warm the patient� Air channels and hose ports

enable comfort and prewarming with a Bair Paws

800 series warming unit or clinical warming

with a 3M

Bair Hugger

500 or 700 series

temperature management unit� The gown also has

fastener strips on each shoulder that provide easy

access to the patient’s arms and chest� The Bair

Paws warming gowns are latex-free and are sized

for pediatric and adult patients�

For additional information on Bair Paws gowns, or other

accessories visit us online at bairpaws�com�

Содержание Bair paws 875


































Результаты поиска

Содержание Bair paws 875

Отзывы:

Похожие инструкции для Bair paws 875

Бренды по названию

Популярные бренды

3M Bair paws 875, Руководство по обслуживанию

Результаты поиска

Содержание Bair paws 875

Отзывы:

Похожие инструкции для Bair paws 875

Бренды по названию

Популярные бренды