9
English 202036A
Check the 3M
TM
Bair Paws
TM
system website to ensure you have the most recent version of this document.
www.bairpaws.com reorder #202036A
Mounting the Warming Unit on an IV Pole
CAUTION:
To prevent tipping, mount the Model 875 warming unit on an IV pole at a
height that ensures stability� We recommend mounting the warming unit no higher than 44
in� (112 cm) from the floor on an IV pole with a minimum wheelbase radius of 14 in� (35�6
cm)� Failure to do so may result in IV pole tipping, leading to potential catheter site trauma
and other patient injuries�
1� Position the IV pole-mount at the desired height on the IV pole�
2� Turn the clamp knob on the IV pole-mount clockwise to tighten the clamp to the pole
(Figure 3)�
3� Snap the warming unit into position by sliding the clip on the back of the warming
unit into the groove of the IV pole-mount� The assembly will click when the clip is fully
seated in the IV pole-mount�
Figure 3� Installing a warming unit onto an IV pole�
Clamp knob
IV pole
IV pole-mount
Clip
