page
8
of
62
3DGence DOUBLE P255 | version 09.2018
4.2. Relocating the printer
To ensure the safety of the user and to avoid accidental damage to the printer, the following rules must be followed when
relocating the printer:
•
before relocating the printer, switch it off and disconnect it from the power source,
•
the printer should be cooled down, the operating material and all loose elements and accessories should be removed from
the printer,
•
the printer should be lifted only by the handles designated for this purpose (fig. 3); do not lift the printer by any other
elements,
•
the printer should not be carried by children and the elderly due to its significant weight (about 25 kg).
Fig. 3 Locations of handles for printer handling
4.3. Choosing proper installation place for the printer
The printer installation place should meet the following conditions:
•
the printer should work at room temperature,
•
the printer is not designed for work in a dusty environment,
•
ventilation suitable for a room size should be ensured,
•
the printer should be installed on a hard and stable ground,
•
the printer should not be exposed to direct sunlight,
•
ensure sufficient free space around the printer based on the printer's external dimensions and working range
of the axes (fig. 4, 5),
•
keep the printer away from other heat sources and draughts,
•
the printer's installation place should be equipped with a 230V/50Hz mains socket (110V version for the USA
market),
•
uninterruptible power supplies (UPS) should be used in order to ensure that the printing process is not
stopped in case of instantaneous current decay.
Содержание DOUBLE
Страница 1: ...USER S MANUAL 3DGence DOUBLE P255 ...
Страница 27: ...page 27 of 62 3DGence DOUBLE P255 version 09 2018 Fig 33 Main menu structure in the idle mode ...
Страница 28: ...page 28 of 62 3DGence DOUBLE P255 version 09 2018 Fig 34 Advanced menu structure ...
Страница 29: ...page 29 of 62 3DGence DOUBLE P255 version 09 2018 Fig 35 Main menu structure in the working mode ...
