page
5
of
62
3DGence DOUBLE P255 | version 09.2018
3DGence DOUBLE P255 printer is equipped with two extruders and two hotends. Thanks to this, two materials can be used in
one printed model. This solution makes it possible to:
•
print geometrically complex models that require soluble support structures,
•
print two-colour models,
•
print functional models that combine characteristics of two specific materials in the required manner.
3DGence DOUBLE P255 printer can use a wide range of printing materials available in many colours. The Certified Material
Base, available at www.3dgence.com, has been created for 3DGence DOUBLE P255 printer.
3DGence is not responsible for the quality of printouts made of the materials other than those included in the Certified Material
Base and for damage caused by the use of such materials as well as it does not provide support for the quality of the printouts
made of the filaments other than those included in the Certified Material Base.
3. SYMBOLS
There are warning symbols placed on 3DGence DOUBLE P255 printer to warn about potential hazards. The following symbol
indicates high temperature occurring in a given place:
Take special care when working in zones marked with the above symbol and use protective gloves. Failure to comply with
safety rules may result in severe burns.
3.1. Auxiliary symbols used in the User's Manual
Throughout this User's Manual the following symbols are used. They identify the situations that are potentially dangerous to
health or may cause damage to the printer. Always adhere to the warning symbols. Negligence may cause the printer's damage
excluded from the guarantee cover as well as bodily injuries.
DANGER:
The situation or procedure described is potentially dangerous and it may result in damage to the printer or
cause injury to the operator. Exercise care.
ATTENTION:
The situation or procedure described is potentially dangerous and it may result in damage to the printer.
Exercise care.
PROTECTION:
Protective gloves, delivered with the printer, must be worn when performing the activities described. Put on
protective gloves before performing these activities.
Содержание DOUBLE
Страница 1: ...USER S MANUAL 3DGence DOUBLE P255 ...
Страница 27: ...page 27 of 62 3DGence DOUBLE P255 version 09 2018 Fig 33 Main menu structure in the idle mode ...
Страница 28: ...page 28 of 62 3DGence DOUBLE P255 version 09 2018 Fig 34 Advanced menu structure ...
Страница 29: ...page 29 of 62 3DGence DOUBLE P255 version 09 2018 Fig 35 Main menu structure in the working mode ...
