page
49
of
62
3DGence DOUBLE P255 | version 09.2018
Fig. 57 Heatbed: 1. Clips | 2. Ceramic heatbed surface
2.
DUAL HOTEND MODULE CALIBRATION
2.1.
Precise axes calibration
3DGence DOUBLE P255 printer, like all 3DGence printers, is equipped with a unique system for precise dimensional correction
of the printed model. The printer is factory calibrated for Verbatim PLA material with the accuracy of 0.1 mm. During printing
with the use of materials having various material shrinkage levels, the dimensional correction may be necessary. In the case of
most printers, such a correction can be very troublesome or even impossible. Thanks to the innovative system, 3DGence
DOUBLE P255 printer allows you to make a precise dimensional correction in a simple and quick way. With just one calibration
printout and simple measurements, this system makes it possible to achieve the accuracy of 0.02 mm.
ATTENTION:
each material from which the filament is made has its own unique thermal shrinkage. To ensure the maximum
precision of results, this calibration should be performed for the material from which the printout is to be made.
To begin the precise calibration of the XY axes, the special printout has to be made (fig. 58).
Dimmension_Calibration.stl
model
is available at www.3dgence/support in the Your file tab (the tab is available after creating an account and registering the
device). The model should be prepared for printing in 3DGence Slicer software for selected materials. The printout will take
about 45 minutes.
Fig. 58 Visualization of Dimmension_Calibration.stl model
Содержание DOUBLE
Страница 1: ...USER S MANUAL 3DGence DOUBLE P255 ...
Страница 27: ...page 27 of 62 3DGence DOUBLE P255 version 09 2018 Fig 33 Main menu structure in the idle mode ...
Страница 28: ...page 28 of 62 3DGence DOUBLE P255 version 09 2018 Fig 34 Advanced menu structure ...
Страница 29: ...page 29 of 62 3DGence DOUBLE P255 version 09 2018 Fig 35 Main menu structure in the working mode ...
