page
25
of
62
3DGence DOUBLE P255 | version 09.2018
CONTROLS
- activates the menu for manual control of the 3DGence DOUBLE P255 printer's functions (fig. 32). During
operation, the "
RISE HEATBED"
and "
LOWER HEATBED"
commands can be often used in order to adjust the height of
the first printout layer. The functions can be used when printing and during a pause in printing.
Fig. 32 Controls menu in the printer's working mode
Extrude/retract
-
activates the material extruding/withdrawal movement. This option applies only to the hotend in active
position and can be activated only after the hotend has reached the minimum operating temperature (similarly as in the idle
mode).
Lower heatbed 0.025/rise heatbed 0.025 - press the key once to move the printer's heatbed down (increase the distance from
the hotend by 0.025 mm) or up (decrease the distance from the hotend by 0.025 mm). The key is useful when adjusting the
adhesion of the first printout layer. The printer's operation is not affected by keeping the key pressed.
Settings
-
used for configuration of 3DGence DOUBLE P255 printer. The working mode menu corresponds to the idle mode
menu (fig. 24).
Abort print
–
the command that cancels the ongoing printing process. Use this option if printing process must be aborted for
any reason, for example, the model has been damaged or the machine code has been incorrect. Printing will be stopped after
a few seconds (after the last commands in the printer's buffer have been executed).
ATTENTION
: when "
ABORT PRINT"
command is selected, the following message will be displayed "
Are you sure you want to
continue?"
. If "
YES"
key is pressed, the interrupted printing process can not be resumed.
Back
–
return to main menu.
MATERIALS
-
displays the screen with information and options related to loading, unloading and change of
consumables (fig. 21). The
MATERIALS
menu in the working mode is similar to that in the idle mode. The only
difference is that the UNLOAD MODEL/SUPPORT MATERIAL key is replaced by the CHANGE MODEL/SUPPORT
MATERIAL key.
TUNE
- enables precise modifications of basic printing parameters. The
TUNE
menu in the working mode is the same
as the
TUNE
menu in the idle mode (fig. 22).
Flow
–
percentage value of amount of fed material. 100% is the default amount of extruded material. The values should not
be changed by more than +/- 5%.
Speed
–
percentage value of printing speed. 100% is the default printing speed.
Tool 0 temp.
- this key makes it possible to set any temperature for the hotend of extruder 0 within the range of 185 - 270
⁰
C.
In the case of inactivity longer than 3 minutes, the heating will be automatically turned off.
Tool 1 temp.
- this key makes it possible to set any temperature for the hotend of extruder 1 within the range of 185 - 270
⁰
C.
In the case of inactivity longer than 3 minutes, the heating will be automatically turned off.
Heatbed temp.
–
this key makes it possible to set any temperature for the printer's heatbed within the range of 40-
160°C.
Содержание DOUBLE
Страница 1: ...USER S MANUAL 3DGence DOUBLE P255 ...
Страница 27: ...page 27 of 62 3DGence DOUBLE P255 version 09 2018 Fig 33 Main menu structure in the idle mode ...
Страница 28: ...page 28 of 62 3DGence DOUBLE P255 version 09 2018 Fig 34 Advanced menu structure ...
Страница 29: ...page 29 of 62 3DGence DOUBLE P255 version 09 2018 Fig 35 Main menu structure in the working mode ...
