page
41
of
62
3DGence DOUBLE P255 | version 09.2018
5.
SLEEP MODE
3DGence DOUBLE P255 printer has the sleep mode function that ensures considerable reduction in power consumption
when the printer is in the idle state for a specified time.
Sleep mode (fig. 46):
•
switches off all heaters,
•
switches off the working field backlight,
•
reduces the energy consumption of the display and limits its wear.
The user can set the time that has to elapse from the last command given to the printer (by the machine code or using the
display) before the sleep mode is activated. The default setting is 60 minutes.
To set the time that has to elapse before the sleep mode is activated:
1.
Go to
MENU → SETTINGS → SLEEP ON
.
2.
Using the keys +/- set a new time (maximum 120 minutes).
3.
The sleep mode can be switched off completely using Off key.
Fig. 46 Sleep mode screen
6.
SWITCHING THE PRINTER OFF
To switch the printer off, press ON/OFF button located at the back of the printer (fig. 15).
After switching the printer off, it is advisable to protect the filaments against moisture, dust and other contaminations.
Additionally, if the printer will not be used for a long time, it is recommended that the guides and trapezoid bolt should be
protected against dust and other contaminations.
After switching the printer off:
•
do not leave the printer in a damp room,
•
do not leave the printer in a dusty room,
•
do not put the printer on high racks/shelves,
•
do not place the printer in the cardboard box/bag/cabinet until the heaters are completely cooled down,
•
keep the printer out of the reach of children,
•
protect the filament and the printer against contamination,
•
disconnect the power leads from the printer before storage.
ATTENTION:
under no circumstances should you switch 3DGence DOUBLE P255 printer off by pulling the power lead
out of the socket. This may cause damage to the printer.
Содержание DOUBLE
Страница 1: ...USER S MANUAL 3DGence DOUBLE P255 ...
Страница 27: ...page 27 of 62 3DGence DOUBLE P255 version 09 2018 Fig 33 Main menu structure in the idle mode ...
Страница 28: ...page 28 of 62 3DGence DOUBLE P255 version 09 2018 Fig 34 Advanced menu structure ...
Страница 29: ...page 29 of 62 3DGence DOUBLE P255 version 09 2018 Fig 35 Main menu structure in the working mode ...
